Publications

Department of Mechanical Processing of Wood

a full list in the Knowledge Base of the Warsaw University of Life Sciences

2021

  • Borysiuk P., Boruszewski P., Auriga R., Danecki L., Auriga A., Rybak K., Nowacka M.: Influence of a bark-filler on the properties of PLA biocomposites, Journal of Materials Science, Springer New York LLC, vol. 56, 2021, 9196–9208, DOI:10.1007/s10853-021-05901-6, 100 points, IF(3,553)
  • Burawska-Kupniewska I., Mańkowski P., Krzosek S.: Mechanical Properties of Machine Stress Graded Sawn Timberdepending on the Log Type, Forests, vol. 12, nr 5, 2021, s. 1-11, DOI:10.3390/f12050532, 100 points, IF(2,116)
  • Jegorowa A., Kurek J., Antoniuk I., Dołowa W., Bukowski M., Czarniak P.: Deep learning methods for drill wear classification based on images of holes drilled in melamine faced chipboard, Wood Science and Technology, Springer, vol. 55, nr 1, 2021, s. 271-293, DOI:10.1007/s00226-020-01245-7, 200 points, IF(2,109)
  • Król P.: Drill Holes Deflection Determination for Small Diameter Bits in Wood-Based Materials, Bioresources, vol. 2, nr 16, 2021, s. 3808-3814, DOI:10.15376/biores.16.2.3808-3814, 100 points, IF(1,409)
  • Krzosek S., Grześkiewicz M., Burawska-Kupniewska I., Mańkowski P.: MECHANICAL PROPERTIES OF POLISH-GROWN PINUS SYLVESTRIS L. STRUCTURAL SAWN TIMBER FROM THE BUTT, MIDDLE AND TOP LOGS, Wood Research, vol. 2, nr 66, 2021, s. 231-242, DOI:10.37763/wr.1336-4561/66.2.231242, 70 points, IF(0,688)
  • Wachowicz J., Dembiczak T., Stradomski G., Bałaga Z., Dyner M., Wilkowski J.: Properties of WCCo Composites Produced by the SPS Method Intended for Cutting Tools for Machining of Wood-Based Materials, Materials, MDPIAG, nr 14, 2021, s. 1-15, DOI:10.3390/ma14102618, 140 points, IF(2,972)
  • Wilkowski J., Barlak M., Bottger R., Werner Z., Konarski P., Pisarek M., Wachowicz J., Von Borany J., Auriga A.: Effect of nitrogen ion implantation on the life time of WC-Co tools used in particleboard milling, Wood Material Science and Engineering, Taylor & Francis, 2021, s. 1-12, DOI:10.1080/17480272.2021.1900391, 100 points, IF(1,265)

2020

  • Auriga R., Gumowska A., Szymanowski K., Wronka A., Robles E., Ocipka P., Kowaluk G.: Performance properties of plywood composites reinforced with carbon fibers, Composite Structures, vol. 248, 2020, s. 1-7, DOI:10.1016/j.compstruct.2020.112533, 140 points, IF(5,138)
  • Auriga R., Borysiuk P., Baran R.: Application of 3D printing technology and computer modelling in designing personalised lightweight board fillings, Information Bulletin of the Research and Development Centre for Wood-based Boards Industry in Czarna Woda, vol. 3-4, 2020, s. 155-166, DOI:10.32086/biuletyn.2020.06, 5 points
  • Barlak M., Wilkowski J., Werner Z., Zagórski J., Staszkiewicz B., Szkarłat F.: Influence of CO2 implantation on durability of WC-Co tools used in processing of wood materials, Information Bulletin of Research and Development Centre for Wood-based Boards Industry in Czarna Woda, vol. 61, nr 3-4, 2020, s. 178-187, DOI:10.32086/biuletyn.2020.08, 5 points
  • Barlak M., Wilkowski J., Werner Z., Staszkiewicz B., Zagórski J., Ziółkowski K.: Influence of the type of modified blade surface on the tool life of WC-Co tools used in woodworking, Information Bulletin of the Research and Development Centre for Wood-based Boards Industry in Czarna Woda, nr 3-4, 2020, s. 167-177, DOI:10.32086/biuletyn.2020.07, 5 points
  • Borysiuk P., Auriga R., Bujak M.: Possibilities of using sunflower husk as a raw material additive for production of chipboards, Information Bulletin of the Research and Development Centre for Wood-based Boards Industry in Czarna Woda, vol. 1-2, 2020, s. 32-44, DOI:10.32086/biuletyn.2020.03, 5 points
  • Borysiuk P., Wilkowski J., Krajewski K., Auriga R., Skomorucha A., Auriga A.: Selected Properties of Flat-Pressed Wood-Polymer Composites for High Humidity Conditions, Bioresources, vol. 15, nr 3, 2020, s. 5141-5155, DOI:10.15376/biores.15.3.5141-5155, 100 points, IF(1,409)
  • Burawska-Kupniewska I., Krzosek S., Mańkowski P., Grześkiewicz M.: Quality and Bending Properties of Scots Pine (PinusSylvestrisL.) Sawn Timber, Forests, vol. 11, nr 11, 2020, s. 1-12, DOI:10.3390/f11111200, 100 points, IF(2,116)
  • Czarniak P., Szymanowski K., Kucharska B., Krawczyńska A., Sobiecki J., Kubacki J., Panjan P.: Modification of tools for wood based materials machining with TiAlN/a-CN coating, Materials Science and Engineering B: Advanced Functional Solid-state Materials , Elsevier S.A., vol. 257, 2020, s. 1-11, DOI:10.1016/j.mseb.2020.114540, 100 points, IF(4,706)
  • Dziabely A., Podziewski P.: Влияние параметров резания на качество обработки в процессе сверления отверстий в ламинированной ДСП (с использованием вертикального обрабатывающего центра с ЧПУ), Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 86-91, DOI:10.5604/01.3001.0014.3313, 20 points
  • Hermas H., Krzosek S.: Produktionsoutput versus Ausbeute Eine analytische Herangehensweise an die Sägewerksorganisation, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 37-42, DOI:10.5604/01.3001.0014.3130, 20 points
  • Jegorowa A., Antoniuk I., Kurek J., Bukowski M., Wioleta D., Czarniak P.: Time-efficient Approach to Drill Condition Monitoring Based on Images of Holes Drilled in Melamine Faced Chipboard, Bioresources, vol. 15, nr 4, 2020, s. 9611-9624, DOI:10.15376/biores.15.4.9611-9624, 100 points, IF(1,409)
  • Jegorowa A., Górski J., Kurek J., Kruk M.: Use of nearest neighbors (k-NN) algorithm in tool condition identification in the case of drilling in melamine faced particleboard, Maderas-Ciencia y Tecnologia, vol. 22, nr 2, 2020, s. 189-196, DOI:10.4067/S0718-221X2020005000205, 70 points, IF(1,257)
  • Jegorowa A., Górski J., Kurek J., Iurev M.: Диагностика режущего инструмента с использованием алгоритма Treebagger во время сверления древесностружечной плиты, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 110, 2020, s. 126-130, DOI:10.5604/01.3001.0014.5556, 20 points
  • Jegorowa A., Górski J., Kurek J.: Исследование использования фузии переменных в процессе применения метода опорных векторов в диагностике сверл во время обработки древесностружечной лиминированной плиты, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 110, 2020, s. 97-102, DOI:10.5604/01.3001.0014.5231, 20 points
  • Król P., Król K.: Assessment of the effectiveness of computer vision using the OpenCV package in finding the centre of a drilled hole in wood-based materials, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, nr 111, 2020, s. 68-72, DOI:10.5604/01.3001.0014.6712, 20 points
  • Krzosek S., Burawska-Kupniewska I., Mańkowski P., Grześkiewicz M., Mirski R.: Comparison of results between visual and machine strength grading of Polish-grown pine timber (Pinus sylvestris L.) from the Baltic Forestry Region, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 110, 2020, s. 9-15, DOI:10.5604/01.3001.0014.3676, 20 points
  • Krzosek S., Burawska-Kupniewska I., Mańkowski P.: The Influence of Scots Pine Log Type(Pinus SylvestrisL.) on the Mechanical Propertiesof Lumber, Forests, vol. 11, nr 12, 2020, s. 1-11, DOI:10.3390/f11121257, 100 points, IF(2,116)
  • Kurek J., Antoniuk I., Świderski B., Jegorowa A., Bukowski M.: Application of Siamese Networks to the Recognition of the Drill Wear State Based on Images of Drilled Holes, Sensors, Multidisciplinary Digital Publishing Institute, vol. 20, nr 23, 2020, s. 1-16, DOI:10.3390/s20236978, 100 points, IF(3,031)
  • Mańkowski P., Krzosek S., Burawska-Kupniewska I., Grześkiewicz M., Radosław M.: Correlation between the share of latewood and the density of sawn timber from the Silesian Forestry Region, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 70-75, DOI:10.5604/01.3001.0014.3267, 20 points
  • ńkowski P., Burawska-Kupniewska I., Krzosek S., Grześkiewicz M.: Influence of Pine (Pinus sylvestris L.) Growth Rings Width on the Strength Properties of Structural Sawn Timber, Bioresources, vol. 15, nr 3, 2020, s. 5402-5416, DOI:10.15376/biores.15.3.5402-5416, 100 points, IF(1,409)
  • Mańkowski P., Krzosek S., Andres B.: THE SUSCEPTIBILITY OF SCOTS PINE HEARTWOOD FROM VARIOUS POLISH FORESTRY REGIONS TO THE BROWN ROT FUNGUS CONIOPHORA PUTEANA (SCHUMACH.) P. KARST, Drewno, vol. 63, nr 206, 2020, s. 63-76, DOI:10.12841/wood.1644-3985.340.04, 70 points, IF(0,578)
  • Marek B., Wilkowski J., Zbigniew W.: Modelling of nitrogen multi-energy ion implantation into WC-Co indexable knives for wood-based materials machining, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 111, 2020, s. 94-105, DOI:10.5604/01.3001.0014.6893, 20 points
  • Marek B., Wilkowski J., Zbigniew W.: Modelowanie procesów multiimplantacji jonów azotu do narzędzi WC-Co wykorzystywanych w obróbce materiałów drzewnych, Biuletyn Informacyjny Ośrodka Badawczo-Rozwojowego Przemysłu Płyt Drewnopochodnych w Czarnej Wodzie, nr 1-2, 2020, s. 56-67, DOI:10.32086/biuletyn.2020.05, 5 points
  • Rębkowski B., Koczan G., Kozakiewicz P., Krzosek S.: An analysis of selected traits of typical supply of oak logs and a comparison of the efficiency of their processing into flooring, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 92-102, DOI:10.5604/01.3001.0014.3324, 20 points
  • Śmietańska K., Podziewski P., Bator M., Górski J.: Automated monitoring of delamination factor during up (conventional) and down (climb) milling of melamine-faced MDF using image processing methods, European Journal of Wood and Wood Products (HOLZ ALS ROH-UND WERKSTOFF), Springer, vol. 78, nr 3, 2020, s. 613-615, DOI:10.1007/s00107-020-01518-9, 140 points, IF(1,542)
  • Wachowicz J.: Spark Plasma Sintering – new technology for obtaining tool materials, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 64-69, DOI:10.5604/01.3001.0014.3262, 20 points
  • Wachowicz J., Michalski A.: Synthesis and properties of WCCo/diamond composite for uses as tool material for wood-based material machining, Composite Interfaces, 2020, s. 1-13, DOI:10.1080/09276440.2020.1799170, 40 points, IF(2,32)
  • Wilkowski J., Marek B., Radosław J., Zbigniew W., Alicja A.: Analysis of sliding friction of WC-Co composite on particleboard, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 111, 2020, s. 60-67, DOI:10.5604/01.3001.0014.6711, 20 points
  • Wilkowski J., Barlak M., Fiedorowicz H., Bartnik A., Werner Z.: The effect of EUV modification of WC-Co indexable knives on the tool life during particleboard milling, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 58-63, DOI:10.5604/01.3001.0014.3175, 20 points

2019

  • Wilkowski J., Barlak M., Werner Z., Zagórski J., Czarniak P., Podziewski P., Szymanowski K., 2019: Lifetime improvement and the cutting forces in nitrogen-implanted drills during wood-based material machining. Wood and Fiber Science 51(2): 209-220
  • Czarniak P., Szymanowski K., Wilkowski J., Górski J., Dagrain F., 2019: Machinability characterization of solid wood with scratching and drilling techniques. Wood Research 64(4): 719-730
  • Dąbrowski M., Górski J., 2019: Mobile shields for standard woodworking machinery as an element of a protection and accident prevention system – the idea and testing. BioResources 14 (2): 3459-3470
  • Jegorowa A., Górski J., Kurek J., Kruk M., 2019: Initial study on the use of support vector machine (SVM) in tool condition monitoring in chipboard drilling. European Journal of Wood and Wood Products 77( 5): 957-959
  • Górski J., Szymanowski K., Podziewski P., Śmietańska K., Czarniak P., Cyrankowski M., 2019: Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling. BioResources 14(2): 3379-3388
  • Dąbrowski M., Górski J., 2019: Influence of cutting conditions on kickback speed in milling wood materials. Wood Research 64( 2): 349-359

2018

  • Podziewski P., Szymanowski K., Górski J., Czarniak P., 2018: Relative machinability of wood-based boards in the case of drilling – experimental study. BioResources 13(1):1761-1772
  • Konopka A., Barański J., Orłowski K., Szymanowski K., 2018: The effect of full-cell impregnation of pine wood (Pinus sylvestris L.) on changes in electrical resistance and on the accuracy of moisture content measurement using resistance meters. BioResources 13(1): 1360-1371
  • Wilkowski J., Barlak M., Werner Z., Wachowicz J., Czarniak P., 2018: Taguchi analysis of WC-Co tools life in milling of wood-based materials. Chip and Chipless Woodworking Processes 11(1): 205-210
  • Wilkowski J., Barlak M., Werner Z., Czarniak P., Wachowicz J., 2018: The effect of the WC-Co properties on the tool wear during particleboards milling. Chip and Chipless Woodworking Processes 11(1): 211-216
  • Wilkowski J., Barlak M., Konarski P., Bottger R., Werner Z., 2018: SIMS depth profile analysis of WC-Co composite used in wood materials machining after nitrogen ion implantation. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 104: 400-404

2017

  • Rogoziński T., Wilkowski J., Górski J., Szymanowski K., Podziewski P., Czarniak P., 2017: Fine particles content in dust created in CNC milling of selected wood composites. Wood and Fiber Science 49(4): 461-469
  • Perisse F., Menecier S., Duffour E., Vacher D., Monier G., Destrebecq J.-F., Czarniak P., Górski J., Wilkowski J., 2017: MDF treatment with a Dielectric Barrier Discharge (DBD) torch. International Journal of Adhesion and Adhesives 79: 18-22
  • Podziewski P., Górski J., Szymanowski K., Cyrankowski M., Czarniak P., 2017: Compreg – machinability during drilling. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 97: 140-143
  • Barlak M., Wilkowski J., Boruszewski P., Zagórski J., Werner Z., 2017: Influence of electron pulses on roughness and wettability of beech wood surface. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 98: 16-19
  • Wilkowski J., Kołodziejczak P., Barlak M., Czarniak P., Werner Z., Staszkiewicz B., 2017: Effect of laser modification of WC-Co tool-life during particleboards milling. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 98: 148-152

2016

  • Kurek J., Kruk M., Osowski S., Hoser P., Wieczorek G., Jegorowa A., Górski J., Wilkowski J., Śmietańska K., Kossakowska J., 2016: Developing automatic recognition system of drill wear in standard laminated chipboard drilling process. Bulletin of the Polish Academy of Sciences – Technical Sciences 64(3): 633-640
  • Barlak M., Wilkowski J., Werner Z., 2016: Ion implantation changes of tribological and corrosion resistance properties of materials used in wood industry. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 94: 19-27
  • Cyrankowski M., Jaskółowski W., Osipiuk J., Górski J., Szymanowski K., Podziewski P., 2016: Ignition temperature of gas combustion products of selected wood materials. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 94:101-104
  • Jegorowa A., Górski J., Czarniak P., 2016: Predvaritel’naâ selekciâ vybrannyh harakteristik diagnostičeskih signalov zaregestrirovannyh vo vremâ sverleniâ v drevesnostružečnoj laminirovannoj plite osnovannaâ na analize ih monotonnosti. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 95: 7-11
  • Chmielewski L., Śmietańska K., Mitas P., Orłowski A., Górski J., Gawdzik G., Janowicz M., Wilkowski J., Podziewski P., 2016: Defect detection in furniture elements with the hough transform applied to 3D data. Proceedings of the 9th international conference on computer recognition systems CORES 2015. Springer International Publishing, Switzerland 2016: 631-640

2015

  • Rogoziński T., Wilkowski J., Górski J., Czarniak P., Podziewski P., Szymanowski K., 2015: Dust creation in CNC drilling of wood composites. Bioresources 10(2): 3657-3665
  • Ruzinska E., Wilkowski J., Mitterova I., Zachar M., 2015: The New Progressive Polymeric Materials for the Reduction of VOC in the Woodworking Industry. Applied Mechanics and Materials 711: 214-217
  • Podziewski P., Górski J., Morek R., Szymanowski K., Czarniak P., Wilkowski J., 2015: Effect of feed rate on cutting forces during drilling raw particleboard, MFP and OSB. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 90: 146-149
  • Polewska N., Śmietańska K., Górski J., Morek R., Wilkowski J., Szymanowski K., 2015: Quality management in polish industry of solid wood furniture – tools, systems, approach. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 92: 339-344
  • Wilkowski J., Bołtralik K., Borysiuk P., Czarniak P., Górski J., Podziewski P., Rousek M., Ruzinska E., Szymanowski K., 2015: Drilling accuracy of long elements from MDF on CNC machining centers. Annals of Warsaw University of Life Sciences – SGGW, Forestry and Wood Technology 90: 211-215

Department of Wood Science and Wood Protection

a full list in the Knowledge Base of the Warsaw University of Life Sciences

2021

  • Zatoń P., Będkowski M., Buraczyk W., Kozakiewicz P., Szeligowski H.: THICKNESS INCREMENTS AND WOOD DENSITY OF NORWAY SPRUCE (PICEA ABIES (L.) H.KARST) FROM THREE POPULATIONS, W: М А Т Е Р І А Л И І міжнародної науково-практичної інтернет-конференції СУЧАСНІ ВИКЛИКИ І АКТУАЛЬНІ ПРОБЛЕМИ ЛІСІВНИЧОЇ ОСВІТИ, НАУКИ ТА ВИРОБНИЦТВА присвяченої 100-річчю від часу заснування агробіотехнологічного (агрономічного) факультету Білоцерківського НАУ / Новак В.п.,i in., 2021, Міністерство освіти і науки України Білоцерківський національний аграрний університет Агробіотехнологічний факультет Кафедра лісового господарства, s. 85-88, 5 points
  • Betlej I., Andres B., Szadkowska D., Krajewski K., Aleksandra O.: Fungicidal Properties of the Medium from SCOBY Microorganism Cultivationin Saturated Wood against Coniophora puteana Fungus, Bioresources, vol. 16, nr 1, 2021, s. 1287-1295, DOI:10.15376/biores.16.1.1287-1295, 100 points, IF(1,409)
  • Bytner O., Laskowska A., Drożdżek M., Kozakiewicz P., Zawadzki J.: Evaluation of the Dimensional Stability of Black Poplar Wood Modified Thermally in Nitrogen Atmosphere, Materials, MDPIAG, vol. 14, nr 6, 2021, s. 1-18, DOI:10.3390/ma14061491, 140 points, IF(2,972)
  • Betlej I., Zakaria S., Krajewski K., Boruszewski P.: Bacterial Cellulose – Properties and Its Potential Application (Bakteria Selulosa – Sifat dan Keupayaan Aplikasi), Sains Malaysiana, vol. 50, nr 2, 2021, s. 493-505, DOI:10.17576/jsm-2021-5002-20, 40 points, IF(0,643)
  • Burawska-Kupniewska I., Mańkowski P., Krzosek S.: Mechanical Properties of Machine Stress Graded Sawn Timberdepending on the Log Type, Forests, vol. 12, nr 5, 2021, s. 1-11, DOI:10.3390/f12050532, 100 points, IF(2,116)
  • Jankowska A., Kozakiewicz P., Zbieć M.: The Effects of Slicing Parameters on Surface Quality of European Beech Wood, Drvna Industrija, nr 72, 2021, s. 57-63, DOI:10.5552/drvind.2021.2013, 40 points, IF(0,663)
  • Koczan G., Karwat Z., Kozakiewicz P.: An attempt to unify the Brinell, Janka and Monnin hardness of wood on the basis of Meyer law, Journal of Wood Science, vol. 67, 2021, s. 1-16, DOI:10.1186/s10086-020-01938-4, 70 ppoints, IF(1,333)
  • Konofalska E., Kozakiewicz P., Buraczyk W., Szeligowski H., Lachowicz H.: The Technical Quality of the Wood of Scots Pine (Pinus sylvestris L.) of Diverse Genetic Origin, Forests, vol. 12, nr 5, 2021, s. 1-10, DOI:10.3390/f12050619, 100 points, IF(2,116)
  • Kozakiewicz P.: Mahoń afrykański tiama– Drewno Egzotyczne z Afryki, Przemysł Drzewny, Wydawnictwo Świat Sp. z o. o., nr 02, 2021, s. 76-79, 5 points
  • Krutul D., Radomski A., Antczak A., Drożdżek M., Kłosińska T., Szadkowska D., Zawadzki J.: INFLUENCE OF THE ENVIRONMENTAL POLLUTION ON THE DISTRIBUTION AND POLYMERIZATION DEGREE OF CELLULOSE IN BARK AND WOOD FROM SCOTS PINE (PINUS SYLVESTRIS L.) STEM, Wood Research, vol. 2, nr 66, 2021, s. 203-210, DOI:10.37763/wr.1336-4561/66.2.203210, 70 points, IF(0,688)

2020

  • Betlej I., Krajewski K., Andres B.: WŁAŚCIWOŚCI ANTYOKSYDACYJNE FOLII CELULOZOWEJ POZYSKANEJ Z HODOWLI MIKROORGANIZMÓW SYNTETYZUJĄCYCH CELULOZĘ, W: Ekologiczne i środowiskowe aspekty towaroznawstwa jako nauki o jakości / Śmiechowska Maria (red.), 2020, Uniwersytet Morski w Gdyni, ISBN 978-83-7421-345-5, s. 5-14, 20 points
  • Akus-Szylberg F., Szadkowski J., Antczak A., Zawadzki J.: Changes in poplar (Populus trichocarpa)wood porous structure after liquid hot water (LHW) pretreatment, Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, nr 112, 2020, s. 71-78, DOI:10.5604/01.3001.0014.8861, 20 points
  • Akus-Szylberg F., Antczak A., Zawadzki J.: Hydrothermal pretreatment of poplar (Populus trichocarpa) wood and its impact on chemical composition and enzymatic hydrolysis yield, Drewno, vol. 63, nr 206, 2020, s. 5-18, DOI:10.12841/wood.1644-3985.367.09, 70 points, IF(0,578)
  • Balan R., Antczak A., Brethauer S., Zielenkiewicz T., Studer M.: Steam Explosion Pretreatment of Beechwood. Part 1: Comparison of the Enzymatic Hydrolysis of Washed Solids and Whole Pretreatment Slurry at Different Solid Loadings, Energies, vol. 13, nr 14, 2020, s. 1-15, DOI:10.3390/en13143653, 140 points, IF(2,702)
  • Balicka A., Szadkowska D.: XRF analysis of heavy metals contents in oak wood (Quercur robur L.), Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, Warsaw University of Life Sciences Press, vol. 109, 2020, s. 76-80, DOI:10.5604/01.3001.0014.3273, 20 points
  • Betlej I., Andres B., Krajewski K.: Evaluation of Fungicidal Effects of Post-culture Medium of Selected Mold Fungi and Bacteria in Relation to Basidiomycetes Fungi, Causing Wood Destruction, Bioresources, vol. 15, nr 2, 2020, s. 2471-2482, DOI:10.15376/biores.15.2.2471-2482, 100 points, IF(1,409)
  • Betlej I., Salerno-Kochan R., Krajewski K., Zawadzki J., Boruszewski P.: The Influence of Culture Medium Components on the Physical and Mechanical Properties of Cellulose Synthesized by Kombucha Microorganisms, Bioresources, vol. 15, nr 2, 2020, s. 3125-3135, DOI:10.15376/biores.15.2.3125-3135, 100 points, IF(1,409)
  • Borysiuk P., Wilkowski J., Krajewski K., Auriga R., Skomorucha A., Auriga A.: Selected Properties of Flat-Pressed Wood-Polymer Composites for High Humidity Conditions, Bioresources, vol. 15, nr 3, 2020, s. 5141-5155, DOI:10.15376/biores.15.3.5141-5155, 100 points, IF(1,409)
  • Brethauer S., Antczak A., Balan R., Zielenkiewicz T., Studer M.: Steam Explosion Pretreatment of Beechwood. Part 2: Quantification of Cellulase Inhibitors and Their Effect on Avicel Hydrolysis, Energies, vol. 13, nr 14, 2020, s. 1-17, DOI:10.3390/en13143638, 140 points, IF(2,702)
  • Burawska-Kupniewska I., Krzosek S., Mańkowski P., Grześkiewicz M.: Quality and Bending Properties of Scots Pine (PinusSylvestrisL.) Sawn Timber, Forests, vol. 11, nr 11, 2020, s. 1-12, DOI:10.3390/f11111200, 100 points, IF(2,116)
  • Dobrowolska E., Jankowska A.: Density Distribution in Wood of European Birch (Betula pendulaRoth.), Forests, vol. 11, nr 4, 2020, s. 1-14, DOI:10.3390/f11040445, 100 points, IF(2,116)
  • Grześkiewicz M., Kozakiewicz P., Borysiuk P., Romanovski V., Cichy A.: INFLUENCE OF TOP LAYER DENSITY AND THICKNESS ON HARDNESS OF TWO-LAYER FLOOR ELEMENTS , Drewno, vol. 63, nr 205, 2020, s. 69-80, DOI:10.12841/wood.1644-3985.336.12, 70 points, IF(0,578)

2019

  • Andres B., Krajewski K.J., Betlej I. 2019: Różnorodność gatunkowa grzybów Basidiomycota powodujących biodeteriorację drewna w budynkach, [w:] Ochrona budynków przed wilgocią, korozją biologiczną i ogniem, W. Skowroński (red.), Wyd. Politechniki Wrocławskiej, XV, 29-39.
  • Antczak A., Świerkosz R., Szeniawski M., Marchwicka M., Akus-Szylberg F., Przybysz P., Zawadzki J., 2019: The comparison of acid and enzymatic hydrolysis of pulp obtained from poplar wood (Populus sp.) by the Kraft method. Drewno, 63(203), 1-14
  • Betlej I, Krajewski K.J., Andres B. 2019: Produkty biobójcze przeznaczone dla budownictwa w aspekcie aktualnych wymagań prawnych, [w:] Ochrona budynków przed wilgocią, korozją biologiczną i ogniem, W. Skowroński (red.), Wyd. Politechniki Wrocławskiej, XV, 41-49.
  • Borysiuk P., Kozakiewicz P., Krzosek S.,2019: Drzewne materiały konstrukcyjne. Wydawnictwo SGGW, Wydanie I, Warszawa. ISBN 978-83-7583-815-2
  • Burawska-Kupniewska Izabela, Krzosek Sławomir, Mańkowski Piotr, Grześkiewicz Marek, Mazurek Andrzej 2019 The influence of pine logs (Pinus sylvestris L.) quality class on the mechanical properties of timber. BioResources 2019, 14, nr 4, 9287-9297
  • Jankowska A., Andres B., Wójcik A., 2019: Characteristic technical properties of Siberian larch (Larix gmellini (Rupr.) Kuzen.) wood. Sylwan 163: 47-54.
  • Kozakiewicz P., Drożdżek M., Laskowska A., Grześkiewicz M., Bytner O., Radomski A., Zawadzki J., 2019: Effects of Thermal Modification on the Selected Physical Properties of Sapwood and Heartwood of Black Poplar (Populus nigraL.). Bioresources, 14 (4), 8391-8404
  • Krajewski A., Kozakiewicz P., Witomski P., Oleksiewicz A., 2019: Naturalna odporność drewna Erythrophleum fordii Oliver i Hopea pierrei Hance na niszczenie przez termity glebowe (The natural wood resistance of Erythrophleum fordii Oliv.and Hopea pierrei Hance to destruction by subterranean termites). Sylwan 163 8): 685-693.
  • Krajewski Adam, Witomski Piotr, Oleksiewicz Anna, 2019, The Impact Of Air Relative Humidity On The Length Of Life Of The Beetle Lyctus Brunneus, Drewno : prace naukowe, doniesienia, komunikaty 2019, Vol. 62, nr 204, s. 147-156. DOI: 10.12841/wood.1644-3985.
  • Monder M., Kozakiewicz P., Jankowska A., 2019: Anatomical structure changes in stem cuttings of rambler roses induced with plant origin preparations Scientia Horticulturae 255:242-254 – www.elsilver.com/locate/scihorti

2018

  • Akus-Szylberg F., Antczak A., Bytner O., Radomski A., Krajewski K., Zawadzki J., 2018: Wpływ wstępnej obróbki słomy kukurydzianej gorącą wodą na jej skład chemiczny i hydrolizę enzymatyczną. Przemysł Chemiczny, 97(11), 1866-1869
  • Aniszewski, M., Drożdżek, M., Niedźwiecki, J., Nowakowska, J., Solecki, R., Tereba, A., & Witomski, P. (2018). The parameters of the environment of deposition and molecular analyses of waterlogged archaeological wood from the early medieval site of Czermno in eastern Poland. Drewno, 61(201), 135–151. http://doi.org/10.12841/wood.1644-3985.239.12
  • Antczak, A., Marchwicka, M., Szadkowski, J., Drożdżek, M., Gawron, J., Radomski, A., & Zawadzki, J. (2018). Sugars yield obtained after acid and enzymatic hydrolysis of fast-growing poplar wood species. BioResources, 13(4), 8629–8645. http://doi.org/10.15376/biores.13.4.8629-8645
  • Jankowska A., 2018: Assessment of the sorptive properties of selected tropical wood species. Drvna industrija 69 (1): 35-42.
  • Jankowska A., Boruszewski P., Drożdżek M., Rębkowski B., Kaczmarczyk A., Skowrońska A., 2018: The Role of Extractives and Wood Anatomy in the Wettability and Free Surface Energy of Hardwoods. BioResources 13 (2): 3082-3097.
  • Jankowska A., Zbieć M., Kozakiewicz P., Koczan G., Oleńska S., Beer P., 2018:The wettability and surface free energy of sawn, sliced and sanded european oak wood. Maderas. Ciencia y Tecnología, [S .l.], v. 20, 2018. ISSN 0718-221X. Maderas – http://revistas.ubiobio.cl/index.php/MCT/article/view/3151.
  • Koczan G., Kozakiewicz P., 2018: Unified anisotropic strength criterion rank two for fibrous materials like wood. Drewno 2018, 61,201 DOI:10.12841/wood.1644-3985.259.11 – http://drewno-wood.pl/archiwum/nr-201-2018
  • Krutul D., Zielenkiewicz T., Zawadzki J., Radomski A., Antczak A., Drożdżek M., 2018: Influence of urban agglomeration environmental pollution on content of chosen metals in bark, roots and wood of Norway maple (Acer platanoides L.). Wood Research, 63(5), 741-754
  • Krutul, D., Zielenkiewicz, T., Gawron, J., Radomski, A., Antczak, A., Drożdżek, M., Zawadzki, J. (2018). Wpływ zanieczyszczeń komunikacyjnych na zawartość wybranych substancji w drewnie i korze morwy białej (Morus alba L.). Przemysł Chemiczny, (7), 1102–1108. http://doi.org/10.15199/62.2018.7.13
  • Laskowska A. 2018: Susceptibility of thermo-mechanically modified Scots pine (Pinus sylvestris L.) sapwood and heartwood to colour change under the influence of ultraviolet radiation. Drvna Industrija 69(3): 253 – 264
  • Laskowska A., Kozakiewicz P., Zbieć M., Zatoń P., Oleńska S., Beer P., 2018: Surface characteristics of Pinus sylvestris L. veneers produced with a peeling process in industrial conditions. BioResources 13 (4): 8342-8357 DOI: 19.15376/biores.13.4.8342-8357 http://ojs.cnr.ncsu.edu/index.php/BioRes/index
  • Laskowska A., Mamiński M. 2018: Properties of particleboard produced from post-industrial UF- and PF-bonded plywood. European Journal of Wood and Wood Products 76(2): 427 – 435
  • Laskowska A., Marchwicka M., Boruszewski P., Wyszyńska J. 2018: Chemical composition and selected physical properties of oak wood (Quercus robur L.) modified by cyclic thermo-mechanical treatment. BioResources 13(4): 9005 – 9019
  • Laskowska A., Sobczak J. W. 2018: Surface chemical composition and roughness as factors affecting the wettability of thermomechanically modified oak (Quercus robur L.). Holzforschung 72(11): 993 – 1000
  • Lehto J. T., Louhelainen J., Kłosińska T., Drożdżek M., Alén R., 2018: Characterization of alkali-extracted wood by FTIR-ATR spectroscopy. Biomass Conversion and Biorefinery No 4, 2018: 847–855. DOI: 10.1007/s13399-018-0327-5.
  • Waliszewska H., Zborowska M., Waliszewska B., Borysiak S., Antczak A., Czekała W., 2018: „Transformation of Miscanthus and Sorghum cellulose during methane fermentation”. Cellulose, 25(2), 1207-1216
  • Wójcik A., Krajewski A. 2018: Preliminary research on mortality of wood destroying Anobiidae (Coleoptera)following the application of p-dichlorobenzene in combination with low oxygen atmosphere fumigation, Polish Journal of Entomology, 87, 141 – 151

2017

  • Bilski Piotr, Bobiński Piotr, Krajewski Adam, Witomski Piotr2017: Detection of woodworms’ larvae based on the acoustic signal analysis and the artificial intelligence algorithm, Archives of Acoustics, 42, 1, 61-70,
  • Boruszewski P., Jankowska A., Kurowska A. 2017: Comparison of the structure of juvenile and mature wood of Larix decidua Mill. from fast-growing plantations in Poland. BioResources 12(1): 1813 – 1825
  • Jankowska A., Andres B., Mastyna B., 2017: Characteristic technical properties of Siberian yellow pine (Pinus sibirica Du Tour.) wood. Sylwan 161 (9): 756-762.
  • Jankowska A., Drożdżek M., Sarnowski P., Horodeński J., 2017: Effect of Extractives on the Equilibrium Moisture Content and Shrinkage of Selected Tropical Wood Species. BioResources 2017, 12(1): 597-607.
  • Jankowska A., Reder M., Gołofit T., 2017: Comparative study of wood color stability using accelerated weathering process and infrared spectroscopy. Wood research 62 (4): 549-556.
  • Jankowska Agnieszka, Andres Bogusław, Mastyna Bartłomiej 2017: Charakterystyka techniczna drewna limby syberyjskiej (Pinus sibirica Du Tour.). Sylwan 161 (9): 756-762
  • Koczan G., Kozakiewicz P., 2017: The role of shear stresses in the bending strength test of short and medium length specimens of wood. Drewno 60, 199, DOI: 10.12841/wood.1644-3985.102.xx – http://drewno-wood.pl/pobierz-274
  • Krutul D., Zielenkiewicz T., Radomski A., Zawadzki J., Antczak A., Drożdżek M., Makowski T., 2017: Metals accumulation in scots pine ( Pinus sylvestris L.) wood and bark affected with environmental pollution. Wood Research, 62(93) 353-364
  • Laskowska A. 2017: The influence of process parameters on the density profile and hardness of surface-densified birch wood (Betula pendula Roth). BioResources 12(3): 6011 – 6023
  • Laskowska A., Kozakiewicz P. 2017: Surface wettability of wood species from tropical and temperate zones by polar and dispersive liquids. Drvna Industrija 68(4): 299 – 306
  • Louhelainen J., Lehto J. T., Kłosińska T., Drożdżek M., Alén R., 2017: Characterization of pre-treatments on wood chips prior to delignification by near infrared spectroscopy. BioResources No 12/4, 2017: 8378-8389.
  • Monder M. J., Kozakiewicz P., Jankowska A., 2017: Effect of Anatomical Structure of Shoots in Different Flowering Phase on Rhizogenesis of Once-blooming Roses. Notulae Botanicae Horti Agrobotanici Cluj-Napoca 45 (2): 408-416.
  • Nowakowska Magdalena, Krajewski Adam, Witomski Piotr 2017: The relationship between the masses of old house borer larvae (Hylotrupes bajulus L.) and their lengths measured on radiograph, Drewno. Prace Naukowe, Doniesienia, Komunikaty, 60,199, 81 – 88, No 199, DOI: 10.12841/wood. 1644-3985.201.xx ,
  • Nowakowska Magdalena, Krajewski Adam, Witomski Piotr, 2017, the relationship between the mass of old house borer larvae Hylotrupes bajulus (L.) and their lengths measured using radiograph. Drewno 2017, 60, 199, 81-88.
  • Nowakowska Magdalena; Krajewski Adam; Piotr Witomski, Piotr Bobiński 2017: Thermic limitation of AE detection method of old house borer larvae (Hylotrupes bajulus L.) in wooden structures, Construction & Building Materials, 136 (2017), 446 – 449,
  • Szadkowski J., Radomski A., Antczak A., Szadkowska D., Lewandowska A., Marchwicka M., Kupczyk A., 2017: Wydajność procesów hydrolizy i fermentacji w technologii wytwarzania bioetanolu z drewna topoli (Populus sp.). Przemysł Chemiczny, 96(3), 518-520
  • Trzciński G., Kozakiewicz P., Selwakowski R., 2017: The technical aspects of using timber in the construction of forest roads. Journal of Water and Land Development, 2017 No. 34 (VII-IX): 241-247 PL ISSN 1429-7426. DOI: 10.1515/wld-2017-0059.

2016

  • Antczak A., Radomski A., Drożdżek M., Zawadzki J., Zielenkiewicz T., 2016: Thermal ageing of cellulose with natural and synthetic antioxidants under various conditions. Drewno, 59(196), 139-152
  • Antczak A., Ziętek K., Marchwicka M., Tylko B., Gawkowski A., Gawron J., Drożdżek M., Zawadzki J., 2016: Cukry wyodrębnione z biomasy szybko rosnących topoli (Populus sp.) jako surowiec do otrzymywania bioetanolu. Przemysł Chemiczny, 95(9), 1770-1773
  • Antczak A., Ziętek K., Marchwicka M., Tylko B., Gawkowski A., Gawron J., Drożdżek M., Zawadzki J., 2016: „Cukry wyodrębnione z biomasy szybko rosnących topoli (Populus sp.) jako surowiec do otrzymywania bioetanolu”. Przemysł Chemiczny, 95(9), 1770-1773
  • Jankowska A., Kozakiewicz P., 2016: Determination of fibre saturation point of selected tropical wood species using different methods. Drewno 59, 197: 89-97 – DOI: 10.12841/wood.1644-3985.C07.12 – http://drewno-wood.pl/pobierz-243
  • Jankowska A., Kozakiewicz P., 2016: Evaluation of wood resistance to artificial weathering factors using compressive properties. Journal Drvna Industrija 67 (1): 3-8 (2016) – http://drvnaindustrija.sumfak.hr/pdf/
  • Krajewski A., Kozakiewicz P., Witomski P., 2016:Shear strength of Scots pine (Pinus sylvestris L.) from the historical buildings. Wood Research 61 (5): 845-850.
  • Krajewski A., Witomski, P. Kotarbiński Sz. 2016: Susceptibility of hornbeam and Scots pine woods to destruction by the subterranean termite Reticulitermes lucifugus RoSSi,1792 (Blattodea: Isoptera), Polish Journal of Entomology, 85: 409 – 417, DOI: 10.1515/pjen-2016-0025,
  • Kurowska A. 2016: Struktura podaży odpadów drzewnych w Polsce. Sylwan 160(3): 187 – 196
  • Laskowska A., Dobrowolska E., Boruszewski P. 2016: The impact of ultraviolet radiation on the colour and wettability of wood used for facades. Drewno 59(197): 99 – 111
  • Lehto J., T., Louhelainnen J., Pakkanen H., Malkavaara P., Kłosińska T., Drożdżek M., Alen R. 2016: Chemometric study on alcaline pre-treatments od wood chips prior to pulping. Bioresources 11/2, 2016: 4621-4632.
  • Mańkowski P., Kozakiewicz P., Drożdżek M., 2016: The selected properties of fossil oak wood from medieval burgh in Płońsk. Wood Research 61 (2): 287- 298 – http://www.centrumdp.sk/wr/201602/12.pdf
  • Szadkowska D., Radomski A., Derewiaka D., Lewandowska A., Drożdżek M., Zawadzki J., Pietrykowski M., Zielenkiewicz T. 2016: Analiza chromatograficzna substancji ekstrakcyjnych pozyskanych z różnych odmian topoli jako potencjalnych inhibitorów hydrolizy enzymatycznej, Przemysł chemiczny, 95, (11) 2179-2182,
  • Witomski Piotr, Olek Wiesław, Bonarski Jan T. (2016): Changes in strength of Scots pine wood (Pinus silvestris L.) decayed by brown rot (Coniophora puteana) and white rot (Trametes versicolor), Construction and Building Materials 102 (2016) 162–166,
  • Zajączkowska U., Kozakiewicz P., 2016: Interaction between secondary phloem and xylem in gravitropic reaction of lateral branches of Tilia cordata Mill. trees. Holzforschung – ISSN (Online) 1437-434
  • Zawadzki J., Gawron J., Antczak A., Kłosińska T., Radomski A., 2016: The influence of heat treatment on the physico-chemical properties of pinewood (Pinus sylvestris L.). Drewno, 59(196), 49-57
  • Zielenkiewicz T., Szadkowski J., Drożdżek M., Zielenkiewicz A., Kłosioska T., Antczak A., Zawadzki J., Gawron J., 2016: Application of x-ray fluorescence technique for determination of heavy metals uptake by different species of poplar. Drewno, 59(197), 113-126

2015

  • Drożdżek M., Zawadzki J., Zielenkiewicz T., Kłosińska T., Gawron J., Gołofit T., Borysiak S. „The influence of method of cellulose isolation from wood on the degree and index of crystallinity”, Wood Research 2015, 60(2), 255-262.
  • Jankowska A., Kozakiewicz P., 2016: Determination of fibre saturation point of selected tropical wood species using different methods. Drewno 59 (197): 89-97 – DOI: 10.12841/wood.1644-3985.C07.12
  • Jankowska A., Kozakiewicz P., 2016: Evaluation of wood resistance to artificial weathering factors using compressive properties. Journal Drvna Industrija 67 (1): 3-8.
  • Kamińska-Dwórznicka A., Matusiak M., Samborska K., Witrowa-Rajchert D., Gondek E., Jakubczyk E., Antczak A., 2015: „The influence of kappa carrageenan and its hydrolysates on the recrystallization process in sorbet”. Journal of Food Engineering, 167 Part B, 162-165
  • Kłosińska T., Archanowicz E., Antczak A., Radomski A., Zielenkiewicz T., Oszako T., Nowakowska J., Kubiak K., Tkaczyk M., 2015: „Analiza zawartości fosfonianów w materiale roślinnym (Content analysis of phosphonates in plant material)”. Przemysł Chemiczny 6, 2015: 1000 – 1005. DOI: 10.15199/62.2015.6.7
  • Kozakiewicz P., Życzkowski W., 2015: Właściwości fizyczne i mechaniczne oraz budowa anatomiczna drewna jałowca pospolitego (Juniperus communis L.). Sylwan 159 (2): 151-159. – http://sylwan.ibles.waw.pl/
  • Krajewski A., Lisiecka E., Drożdżek M., Witomski P. 2015: The suscebility of neolithic waterlogged beech wood (Fagus sylvatica L.) to destruction by Reticulitermes lucifugus Rossi, Drewno. Prace Naukowe, Doniesienia, Komunikaty, 58, 195, 59 – 68, DOI: 10.12841/wood. 1644-3985.113.05,
  • Krutul D., Zielenkiewicz T., Zawadzki J., Radomski A., Antczak A., Drożdżek M., Kłosińska T., Makowski T., 2015: „Non-metals accumulation in scots pine (Pinus sylvestris L.) wood and bark affected with environmental pollution”. Wood Research, 60(4), 655-662
  • Lewandowska A., Radomski A., Marchwicka M., Szadkowska D., Archanowicz E., Szadkowski J., Gawron J., Zielenkiewicz T., Kłosioska T., Zawadzki J., 2015: Study on products of enzymatic hydrolysis of pulp from poplar wood (Populus alba L.). Przemysł Chemiczny, 94 (7), 1134-1137
  • Lewandowska A., Radomski A., Marchwicka M., Szadkowska D., Archanowicz E., Szadkowski J., Gawron J., Zielenkiewicz T., Kłosińska T., Zawadzki J. 2015: Study on products of enzymatic hydrolysis of pulp from poplar wood (Populus alba L.) Przemysł Chemiczny 94 (7), 1134-1137.
  • Mańkowski Piotr, Andres Bogusław 2015: Compressive strength of wood Pinus sylvestris decayed by Coniophora puteana fungi and reinforced with Paraloid b-72. Wood Research, 60 (3): 409-416
  • Marchwicka M., Radomski A., Antczak A., Szadkowski J., Lewandowska A., Szadkowska D., Zielenkiewicz T., Drożdżek M., Archanowicz E.I., 2015: Wpływ obróbki wstępnej biomasy z topoli (Populus sp.) na wydajność hydrolizy enzymatycznej, Przemysł chemiczny 5, 94, 814-817,
  • Szadkowska D., Radomski A., Marchwicka M., Lewandowska A., Szadkowski J., Zawadzki J., Drożdżek M., Auriga R., 2015: Suitability of biomass from waste wood composites for liquid biofuel production. Przemysł Chemiczny, 94 (10), 1700-1702
  • Szadkowska D., Radomski A., Marchwicka M., Lewandowska A., Szadkowski J., Zawadzki J., Drożdżek M., Auriga R. 2015: Suitability of biomass from waste wood composites for liquid biofuel production. Przemysł Chemiczny 94 (10), 1700-1702.
  • Zawadzki J., Szadkowska D., Antczak A., Drożdżek M., Zielenkiewicz T., Kłosińska T., 2015: Wpływ furfuralu na aktywność enzymu podczas hydrolizy celulozy wyodrębnionej z drewna topoli (Populus sp.). Przemysł Chemiczny No 94/11, 2015: 1941-1944.

Department of Technology and Entrepreneurship in the Wood Industry

a full list in the Knowledge Base of the Warsaw University of Life Sciences

2021

  • Betlej I., Zakaria S., Krajewski K., Boruszewski P. 2021: Bacterial Cellulose – Properties and Its Potential Application (Bakteria Selulosa – Sifat dan Keupayaan Aplikasi), Sains Malaysiana, vol. 50, nr 2, 493-505, DOI:10.17576/jsm-2021-5002-20, 40 punktów, IF(0,643)
  • Borek K., Romaniuk W., Roman K., Roman M., Kuboń M. 2021: The Analysis of a Prototype Installation for Biogas Production from Chosen Agricultural Substrates, Energies, vol. 14, nr 8, 1-19, DOI:10.3390/en14082132, 140 punktów, IF(2,702)
  • Boruszewski P., Auriga R., Danecki L., Auriga A., Rybak K., Nowacka M. 2021: Influence of a bark-filler on the properties of PLA biocomposites, Journal of Materials Science, Springer New York LLC, vol. 56, 9196–9208, DOI:10.1007/s10853-021-05901-6, 100 punktów, IF(3,553)
  • Mańkowski P., Krzosek S. 2021: Mechanical Properties of Machine Stress Graded Sawn Timberdepending on the Log Type, Forests, vol. 12, nr 5, 1-11, DOI:10.3390/f12050532, 100 punktów, IF(2,116)
  • Burawska-Kupniewska I., Beer P. 2021: Near-Surface Mounted Reinforcement of Sawn TimberBeams-FEM Approach, Materials, MDPIAG, vol. 11, nr 14, 2780, DOI:10.3390/ma14112780, 140 punktów, IF(2,972)
  • Grzegorzewska E., Sedliačiková M., Kalafús J. 2021: A comparison of the importance of the furniture manufacturing in EU countries using cluster analysis and Hellwig’s method , Acta Facultatis Xylologiae, Technical University in Zvolen, vol. 63, nr 1, 151−164, DOI:10.17423/afx.2021.63.1.14, 40 punktów
  • Grzegorzewska E., Sedliačiková M. 2021: Labour productivity in the sustainable development of wood-based industry: A case for the European Union countries, Bioresources, vol. 16, nr 2, 3643-3661, DOI:10.15376/biores.16.2.3643-3661, 100 punktów, IF(1,409)
  • Kozakiewicz P., Zbieć M. 2021: The Effects of Slicing Parameters on Surface Quality of European Beech Wood, Drvna Industrija, nr 72, 57-63, DOI:10.5552/drvind.2021.2013, 40 punktów, IF(0,663)
  • Karwat Z., Kozakiewicz P. 2021: An attempt to unify the Brinell, Janka and Monnin hardness of wood on the basis of Meyer law, Journal of Wood Science, vol. 67, 1-16, DOI:10.1186/s10086-020-01938-4, 70 punktów, IF(1,333)
  • Konieczna A., Roman K., Roman M., Śliwiński D., Roman M. 2021: Energy Efficiency of Maize Production Technology: Evidence from Polish Farms, Energies, vol. 14, nr 1, 1-20, DOI:10.3390/en14010170, 140 punktów, IF(2,702)
  • Krzosek S., Burawska-Kupniewska I., Mańkowski P. 2021: Geographical Origin and Log Quality Influence on the Mechanical Properties of Scots Pine Sawnwood, Bioresources, vol. 16, nr 1, 669-683, DOI:10.15376/biores.16.1.669-683, 100 punktów, IF(1,409)
  • Grześkiewicz M., Burawska-Kupniewska I., Mańkowski P. 2021: MECHANICAL PROPERTIES OF POLISH-GROWN PINUS SYLVESTRIS L. STRUCTURAL SAWN TIMBER FROM THE BUTT, MIDDLE AND TOP LOGS, Wood Research, vol. 2, nr 66, 231-242, DOI:10.37763/wr.1336-4561/66.2.231242, 70 punktów, IF(0,688)
  • Lee C., Chin K., H’ng P., Rashid U., Mamiński M., Khoo P. 2021: Effect of pretreatment conditions on the chemical–structural characteristics of coconut and palm kernel shell: A potentially valuable precursor for eco-efficient activated carbon production, Environmental Technology and Innovation, Elsevier BV, vol. 21, 1-16, DOI:10.1016/j.eti.2020.101309, 70 punktów, IF(3,356)
  • Małachowska E., Pawcenis D., Dańczak J., Paczkowska J., Przybysz K. 2021: Paper Ageing: The Effect of Paper Chemical Composition on Hydrolysis and Oxidation, Polymers, vol. 13, nr 7, 1-15, DOI:10.3390/polym13071029, 100 punktów, IF(2,935)
  • Mazur K., Roman K., Wardal W., Borek K., Barwicki J., Kierończyk M. 2021: Emission of harmful gases from animal production in Poland, Environmental Monitoring and Assessment, vol. 193, nr 6, 1-9, DOI:10.1007/s10661-021-09118-7, 70 punktów, IF(1,903)
  • Roman K., Roman M., Szadkowska D., Szadkowski J., Grzegorzewska E. 2021: Evaluation of Physical and Chemical Parameters According to Energetic Willow (Salix viminalis L.) Cultivation, Energies, vol. 14, nr 10, 2968, DOI:10.3390/en14102968, 140 punktów, IF(2,702)
  • Barwicki J., Hryniewicz M., Szadkowska D., Szadkowski J. 2021: Production of Electricity and Heat from Biomass Wastes Using a Converted Aircraft Turbine AI-20, Processes, MDPI, vol. 9, nr 2, 1-15, DOI:10.3390/pr9020364, 70 punktów, IF(1,963)
  • Roman M., Roman K., Roman M. 2021: Spatial Variation in Particulate Emission Resulting from Animal Farming in Poland, Agriculture (Switzerland), Multidisciplinary Digital Publishing Institute (MDPI), vol. 11, nr 2, 1-14, DOI:10.3390/agriculture11020168, 100 punktów, IF(2,072)
  • Romero Gázquez J., Bueno Delgado M., Ortega Gras J., Garrido Lova J., Gómez Gómez M., Zbieć M. 2021: Lack of skills, knowledge and competences in Higher Education about Industry 4.0 in the manufacturing sector, RIED-Revista Iberoamericana de Educacion a Distancia, vol. 24, nr 1, 285-313, DOI:10.5944/ried.24.1.27548, 20 punktów

2020

  • Grzegorzewska E., Stasiak-Betlejewska R. 2020: Effectiveness of labour resources in building competitive adventage – a lesson from the furniture industry of selected EU countries, W: Management aspects in forestry and forest based industries : scientific book / Jelačić Denis (red.), WoodEMA, ISBN 978-953-57822-7-8, 153-165, 5 punktów
  • Grzegorzewska E., Stasiak-Betlejewska R. 2020: THE IMPORTANCE OF POLISH FURNITURE INDUSTRY EXPORT FOR SELECTED EU COUNTRIES, W: SUSTAINABILITY OF FOREST-BASED INDUSTRIES IN THE GLOBAL ECONOMY / Jelačić Denis (red.), 2020, WoodEMA, ISBN 978-953-57822-8-5, 145-150, 5 punktów
  • Grzegorzewska E. 2020: Znaczenie sektora MŚP dla rozwoju przemysłu meblarskiego w wybranych krajach UE, W: Firmy Rodzinne – rozwój i konkurencyjność (red.), Społeczna Akademia Nauk, ISBN 978-83-64971-93-8, 107-121, 20 punktów
  • Stasiak-Betlejewska R., Grzegorzewska E. 2020: DIRECTIONS OF DEVELOPMENT OF THE FURNITURE INDUSTRY IN POLAND BASED ON TREND ANALYSIS AND MARKET TRENDS, W: SUSTAINABILITY OF FOREST-BASED INDUSTRIES IN THE GLOBAL ECONOMY / Jelačić Denis (red.), WoodEMA, ISBN 978-953-57822-8-5, 123-128, 5 punktów
  • Stasiak-Betlejewska R., Grzegorzewska E. 2020: Problems of industrial property protection in Polish furniture industry, W: Management aspects in forestry and forest based industries : scientific book / Jelačić Denis (red.), WoodEMA, ISBN 978-953-57822-7-8, 217-233, 5 punktów
  • Gumowska A., Szymanowski K., Wronka A., Robles E., Ocipka P., Kowaluk G. 2020: Performance properties of plywood composites reinforced with carbon fibers, Composite Structures, vol. 248, 1-7, DOI:10.1016/j.compstruct.2020.112533, 140 punktów, IF(5,138)
  • Barwicki J., Mazur K., Kierończyk M., Borek K., Wardal W., Roman K. 2020: Wpływ zakwaszania gnojowicy kwasem siarkowym na wybrane właściwości fizykochemiczne gleb w przykładowych uprawach, Przemysł Chemiczny, Wydawnictwo SIGMA – N O T Sp. z o.o., vol. 99, nr 11, 1600-1604, DOI:10.15199/62.2020.11.2, 40 punktów, IF(0,485)
  • Salerno-Kochan R., Krajewski K., Zawadzki J., Boruszewski P. 2020: The Influence of Culture Medium Components on the Physical and Mechanical Properties of Cellulose Synthesized by Kombucha Microorganisms, Bioresources, vol. 15, nr 2, 3125-3135, DOI:10.15376/biores.15.2.3125-3135, 100 punktów, IF(1,409)
  • Borysiuk P., Wilkowski J., Krajewski K., Auriga R., Skomorucha A., Auriga A. 2020: Selected Properties of Flat-Pressed Wood-Polymer Composites for High Humidity Conditions, Bioresources, vol. 15, nr 3, 5141-5155, DOI:10.15376/biores.15.3.5141-5155, 100 punktów, IF(1,409)
  • Krzosek S., Mańkowski P., Grześkiewicz M. 2020: Quality and Bending Properties of Scots Pine (PinusSylvestrisL.) Sawn Timber, Forests, vol. 11, nr 11, 1-12, DOI:10.3390/f11111200, 100 punktów, IF(2,116)
  • Chin K., Lee C., H’ng P., Rashid U., Paridah M., Khoo P., Mamiński M. 2020: Refining Micropore Capacity of Activated Carbon Derived from Coconut Shell via Deashing Post-Treatment, Bioresources, vol. 15, nr 4, 7749-7769, DOI:10.15376/biores.15.4.7749-7769, 100 punktów, IF(1,409)
  • Grzegorzewska E., Burawska-Kupniewska I., Boruszewski P. 2020: Economic profitability of particleboards production with a diversified raw material structure, Maderas-Ciencia y Tecnologia, vol. 22, nr 4, 537-548, DOI:10.4067/S0718-221X2020005000412, 70 punktów, IF(1,257)
  • Grzegorzewska E., Sedliačiková M., Drábek J., Behún M. 2020: Evaluating the international competitiveness of polish furniture manufacturing industry in comparison to the selected EU countries, Acta Facultatis Xylologiae, Technical University in Zvolen, vol. 62, nr 2, 149-164, DOI:10.17423/afx.2020.62.2.14, 40 punktów
  • śkiewicz M., Kozakiewicz P., Borysiuk P., Romanovski V., Cichy A. 2020: INFLUENCE OF TOP LAYER DENSITY AND THICKNESS ON HARDNESS OF TWO-LAYER FLOOR ELEMENTS , Drewno, vol. 63, nr 205, 69-80, DOI:10.12841/wood.1644-3985.336.12, 70 punktów, IF(0,578)
  • Rybak K., Nowacka M., Boruszewski P. 2020: Insight of Weathering Processes Based on Monitoring Surface Characteristic of Tropical Wood Species, Coatings, vol. 10, nr 9, 1-15, DOI:10.3390/coatings10090877, 100 punktów, IF(2,33)
  • Drożdżek M., Laskowska A., Grześkiewicz M., Bytner O., Radomski A., Mróz A., Betlej I., Zawadzki J. 2020: Chemical Composition asaFactor Affecting the Mechanical Properties of Thermally Modified Black Poplar (Populus nigraL.), Bioresources, vol. 15, nr 2, 3915-3929, DOI:10.15376/biores.15.2.3915-3929, 100 punktów, IF(1,409)
  • Jankowska A., Mamiński M., Marciszewska K., Ciurzycki W., Tulik M. 2020: The Wood of Scots Pine (Pinus sylvestris L.) from Post-Agricultural Lands Has Suitable Properties for the Timber Industry, Forests, vol. 11, nr 10, 1-10, DOI:10.3390/f11101033, 100 punktów, IF(2,116)
  • Burawska-Kupniewska I., Mańkowski P. 2020: The Influence of Scots Pine Log Type(Pinus SylvestrisL.) on the Mechanical Propertiesof Lumber, Forests, vol. 11, nr 12, 1-11, DOI:10.3390/f11121257, 100 punktów, IF(2,116)
  • Mamiński M. 2020: The properties of particles produced from waste plywood by shredding in a single-shaft shredder, Maderas-Ciencia y Tecnologia, vol. 22, nr 2, 197-204, DOI:10.4067/S0718-221X2020005000206, 70 punktów, IF(1,257)
  • Małachowska E., Dubowik M., Lipkiewicz A., Przybysz K., Przybysz P. 2020: Analysis of Cellulose Pulp Characteristics and Processing Parameters for Efficient Paper Production, Sustainability, vol. 12, nr 17, 1-12, DOI:10.3390/su12177219, 70 punktów, IF(2,592)
  • Małachowska E., Dubowik M., Boruszewski P., Łojewska J., Przybysz P. 2020: Influence of lignin content in cellulose pulp on paper durability, Scientific Reports, Nature Publishing Group, vol. 10, 1-12, DOI:10.1038/s41598-020-77101-2, 140 punktów, IF(3,998)
  • Mamiński M., Więcław-Midor A., Parzuchowski P. 2020: The Effect of Silica-Filler on Polyurethane Adhesives Based on Renewable Resource for Wood Bonding, Polymers, vol. 12, nr 10, 1-13, DOI:10.3390/polym12102177, 100 punktów, IF(2,935)
  • Mańkowski P., Burawska-Kupniewska I., Krzosek S., Grześkiewicz M. 2020: Influence of Pine (Pinus sylvestris L.) Growth Rings Width on the Strength Properties of Structural Sawn Timber, Bioresources, vol. 15, nr 3, 5402-5416, DOI:10.15376/biores.15.3.5402-5416, 100 punktów, IF(1,409)
  • Nurek T., Gendek A., Roman K., Dąbrowska M. 2020: The Impact of Fractional Composition on the Mechanical Properties of Agglomerated Logging Residues, Sustainability, vol. 12, nr 15, 1-13, DOI:10.3390/su12156120, 70 punktów, IF(2,592)
  • Parzuchowski P., Mamiński M. 2020: Poly-(3-ethyl-3-hydroxymethyl)oxetanes – synthesis and adhesive interactions with polar substrates, Polymers, vol. 12, nr 1, 1-13, DOI:10.3390/polym12010222, 100 punktów, IF(2,935)
  • Parzuchowski P., Świderska A., Roguszewska M., Rolińska K., Wołosz D., Mamiński M. 2020: Hyperbranched Poly(ether-siloxane)s Containing Ammonium Groups: Synthesis, Characterization and Catalytic Activity, Polymers, vol. 12, nr 4, 3-19, DOI:10.3390/polym12040856, 100 punktów, IF(2,935)
  • Przybysz P., Dubowik M., Małachowska E., Kucner M., Gajadhur M., Przybysz K. 2020: The Effect of the Refining Intensity on the Progress in Internal Fibrillation and Shortening of Cellulose Fibers, Bioresources, vol. 15, nr 1, 1482-1499, DOI:10.15376/biores.15.1.1482-1499, 100 punktów, IF(1,409)
  • Ratnasingam J., Yi L., Azim A., Halis R., Liat L., Khoo A., Daud M., Senin A., Latib H., Zbieć M. 2020: Assessing the Awareness and Readiness of the Malaysian Furniture Industry for Industry 4.0, Bioresources, vol. 15, nr 3, 4866-4885, DOI:10.15376/biores.15.3.4866-4885, łączna liczba autorów: 18, 100 punktów, IF(1,409)
  • Roman K., Borek K., Mazur K., Wardal W. 2020: The measurements of PM2.5 dust concentration by using an integrated optical sensor, Przegląd Elektrotechniczny, Sigma NOT, vol. 96, nr 4, 129-132, DOI:10.15199/48.2020.04.27, 20 punktów
  • Sala C., Robles E., Kowaluk G. 2020: Influence of Adding Offcuts and Trims with a Recycling Approach on the Properties of High-Density Fibrous Composites, Polymers, vol. 12, nr 6, 1-14, DOI:10.3390/polym12061327, 100 punktów, IF(2,935)
  • Sala C., Robles E., Gumowska A., Wronka A., Kowaluk G. 2020: Influence of Moisture Content on the Mechanical Properties of Selected Wood-based Composites, Bioresources, vol. 15, nr 3, 5503-5513, DOI:10.15376/biores.15.3.5503-5513, 100 punktów, IF(1,409)
  • Sala C., Robles E., Kowaluk G. 2020: Influence of the Addition of Spruce Fibers to Industrial-Type High-Density Fiberboards Produced with Recycled Fibers, Waste and Biomass Valorization, 1-10, DOI:10.1007/s12649-020-01250-8, 70 punktów, IF(2,851)
  • Zainal Abidin S., Ibrahim A., Mohd Ghazali A., Azroll Ahmad M., Anuar Bahari S., Shaleh Mujir M., Bueno Delgado M., Zbieć M., Garrido J., Ortega J. 2020: The Challenges of Developing a Validation Protocol for the New Curriculum of Making 4.0: Between Malaysian and European Education Systems, International Journal of Innovation, Creativity and Change, Primrose Hall Publishing Group, vol. 14, nr 5, 767-786, łączna liczba autorów: 15, 40 punktów

2019

  • Borysiuk P., Burawska-Kupniewska I., Auriga R., Kowaluk G., Kozakiewicz P., Zbieć M. 2019: Influence of layered structure of composite timber floor boards on their hardness. Drvna Industrija 70 (4), 399-406
  • Borysiuk P., Jenczyk-Tolloczko I., Auriga R., Kordzikowski M. 2019: Sugar beet pulp as raw material for particleboard production. Industrial Crops & Products 141 (2019) 111829
  • Borysiuk P., Kozakiewicz P., Krzosek S. 2019: Drzewne materiały konstrukcyjne. Wydawnictwo SGGW,
    Wydanie I, Warszawa. ISBN 978-83-7583-815-2
  • Burawska-Kupniewska I., Krzosek S., Mańkowski P., Grześkiewicz M., Mazurek A. 2019: The influence of pine logs (Pinus sylvestris L.) quality class on the mechanical properties of timber. Bioresources 14 (4) 9287-9297
  • Grzegorzewska E. 2019: Uwarunkowania rozwoju przemysłu meblarskiego w Polsce na tle krajów Unii Europejskiej, Wydawnictwo SGGW w Warszawie, Warszawa 2019, 302 ss.
  • Gumowska A., Kowaluk G., Labidi J., Robles E. 2019: Barrier properties of cellulose nanofibers film as an external layer of particleboard. Clean Technologies and Environmental Policy 21, 2073-2079
  • Kowaluk G., Szymanowski K., Kozłowski P., Kukuła W., Sala C., Robles E., Czarniak P. 2019: Functional Assessment of Particleboards Made of Apple and Plum Orchard Pruning. Waste and Biomass Valorization, 1 – 10 (doi: 10.1007/s12649-018-00568-8)
  • Kozakiewicz P., Drożdzek M., Laskowska A., Grześkiewicz M., Bytnar O., Radomski A., Zawadzki J. 2019: Effects of thermal modification on selected physical properties of sapwood and heartwood of black poplar (Populus nigra L.). BioResources 14(4), 8391-8404
  • Król P., Borysiuk P., Mamiński M. 2019: Comparison of Methodologies for Acid Buffering Capacity Determination-Empirical Verification of Models. Applied Sciences 9(11), 2345
  • Małachowska E., Dubowik M. 2019: Comparison of the Beatability for Fast-growing Plants, Softwood, and Hardwood Sources of Fibers. BioResources 14(2), 3092-3100
  • Małachowska E., Lipkiewicz A., Niemczyk M., Dubowik M., Boruszewski P., Przybysz P. 2019: Influences of Fiber and Pulp Properties on Papermaking Ability of Cellulosic Pulps Produced from Alternative Fibrous Raw Materials. Journal of Natural Fibers, 1-11 (doi: 10.1080/15440478.2019.1697994)
  • Mamiński M., Romanowska A. 2019: Polyglycerol- and sucrose-based green polyurethane adhesives for veneering, Drvna Industrija 70, 229-233
  • Niemczyk M., Przybysz P., Przybysz K., Karwański M., Kaliszewski A., Wojda T., Liesebach M. 2019: Productivity, Growth Patterns, and Cellulosic Pulp Properties of Hybrid Aspen Clones. Forests 10(5), 450
  • Przybysz Buzała K., Kalinowska H., Małachowska E., Boruszewski P., Krajewski K., Przybysz P. 2019: Effect of lignin content in birch and beech kraft cellulosic pulps on simple sugars yields from enzymatic hydrolysis of cellulose. Energies 12(15), 2952, 1-11
  • Przybysz K., Małachowska E., Martyniak D., Boruszewski P., Kalinowska H., Przybysz P. 2019: Production of Sugar Feedstocks for Fermentation Processes from Selected Fast Growing Grasses. Energies 12(16), 3129, 1-12

2018

  • Boratyńska K., Grzegorzewska E. 2018: Bankruptcy prediction in the agribusiness sector: Lessons from quantitative and qualitative approaches. Journal of Business Research 89, 175-181
  • Borysiuk P., Auriga R., Stępień M., Jenczyk-Tołłoczko I. 2018: Attempts at application of polyethylene-coated waste paper as a raw material in the insulation boards production. Proceedings of the 11th International Science Conference: „Chip and Chipless Woodworking Processes”, 235-240
  • Chin K.L., H’ng P.S., Mamiński M., Go W.Z., Lee C.L., Raja-Nazrin R.A., Khoo P.S., Ashikin S.N., Halimatun I. 2018: Additional additives to reduce ash related operation problems of solid biofuel from oil palm biomass upon combustion, Industrial Crops and Products 123, 285-295
  • Gumowska A., Wronka A., Borysiuk P., Robles E., Sala C., Kowaluk G. 2018: Production of layered wood composites with a time-saving layer-by-layer addition. BioResources 13(4), 8089-8099
  • Jankowska A., Boruszewski P., Drożdżek M, Rębkowski B., Kaczmarczyk A., Skowrońska A. 2018: The role of extractives and wood anatomy in the wettability and free surface energy of hardwoods. Bioresources 13(2), 3082-3097
  • Jankowska A., Zbieć M., Kozakiewicz P., Koczan G., Oleńska S., Beer P. 2018: The wettability and surface free energy of sawn, sliced and sanded european oak wood. Maderas-Ciencia y Tecnologia 20(3), 443-454
  • Karwat Z, Koczan G. 2018: Making of tension testing samples by turning and milling in single process. Proceedings of the 11th International Science Conference: „Chip and Chipless Woodworking Processes”,
    73-78
  • Khoo P.S., H’ng P.S., Chin K.L., Bakar E.S., Mamiński M., Raja-Ahmad R.-N., Lee C.L., Ashikin S.N., Saharudin M.- H. 2018: Peeling of small diameter rubber log using spindleless lathe technology: evaluation of veneer properties from outer to inner radial section of log at different veneer thicknesses. European Journal of Wood and Wood Products 4, 1335-1346
  • Laskowska A., Kozakiewicz P., Zbieć M., Zatoń P., Oleńska S., Beer P. 2018: Surface characteristics of scots pine produced with a peeling process in industrial conditions. BioResources 13(4), 8342-8357
  • Laskowska A., Mamiński M. 2018: The properties of particleboards produced from post-production UF- and PF-bonded waste plywood. European Journal of Wood and Wood Products 76, 427-435
  • Laskowska A., Marchwicka M., Boruszewski P., Wyszyńska J. 2018: Chemical composition and selected physical properties of oak wood (Quercus robur L.) modified by cyclic thermo-mechanical treatment. Bioresources 13(4), 9005-9019
  • Lee C.L., H’ng P.S., Paridah Md T., Chin K.L., Rashid U., Mamiński M., Go W.Z., Nazrin Raja A.R., Rosli S.N.A., Khoo P.S. 2018: Production of bioadsorbent from phosphoric acid pretreated palm kernel shell and coconut shell by two-stage continuous physical activation via N2 and air. Royal Society Open Science 5(12), 180775
  • Mamiński M., Trzepałka A., Auriga R., H’ng P.S., Chin K.L. 2018: Physical and mechanical properties of thin high density fiberboard bonded with 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU). Journal of Adhesion, 1-12 (doi:10.1080/00218464.2018.1500280)
  • Mohammad Padzil, F. N., Ariffin, H., Zakaria, S., Boruszewski, P., Krajewski, K. J., Mamiński, M. L. 2018: Effect of poplar cultivar “Hybrid 275” fiber impregnation with 1,3-dimethylol-4,5-dihydroxyethyleneurea on the properties of high density fiberboards. Bioresources 13(4), 7470-7480
  • Nowacka M., Rybak K., Wiktor A., Mika A., Boruszewski P., Woch J., Przybysz K., Witrowa-Rajchert D. 2018: The quality and safety of food contact materials – paper and cardboard coated with paraffin emulsion. Food Control 93, 183-190
  • Padzil F. N. M., Ariffin H., Zakaria S., Boruszewski P., Krajewski K., Mamiński M. 2018: Effect of Poplar Cultivar “Hybrid 275” Fiber Impregnation with DMDHEU on the Properties of High Density Fiberboards. Bioresources 13(4), 7470-7480
  • Przybysz K., Małachowska E., Martyniak D., Boruszewski P., Iłowska J., Kalinowska H., Piotr Przybysz P. 2018: Yield of Pulp, Dimensional Properties of Fibers, and Properties of Paper Produced from Fast Growing Trees and Grasses. BioResources 13(1), 1372-1387
  • Rosienkiewicz M., Kowalski A., Helman J., Zbieć M. 2018: Development of Lean Hybrid furniture production control system based on Glenday sieve, artificial neural networks and simulation modeling. Drvna Industrija 69(2), 163-173

2017

  • Beer P., Olenska S., Podobas I., Zbiec M. 2017: Design for AAL integrated furniture for the Care and support of elderly and disabled people. Drvna Industria 68 (3), 185-193
  • Boruszewski P., Jankowska A., Kurowska A. 2017: Comparison of the structure of juvenile and mature wood of Larix decidua Mill. from fast-growing plantations in Poland. BioResources 12(1), 1813-1825
  • Grzegorzewska E., Więckowska M. 2017: Market threats and opportunities in the implementation of sustainable products – results from empirical study of furniture industry. Drewno 60(200), 111-123
  • Jaskółowski W., Boruszewski P., Lukaszek-Chmielewska A. 2017: Analysis and assessment of flammable selected wood based panels received from renewable raw materials at accelerated production system. Proceedings of the 7th International Conference on Mechanics and Materials in Design (11-15.06.2017, Albufeira, Portugal), Editors J.F. Silva Gomes and S.A. Meguid. Publ. INEGI/FEUP
  • Król P., Toczyłowska-Mamińska R., Mamiński M. 2017: A critical role for the presence of lignocellulosic material in the determination of wood buffering capacity. Journal of Wood Chemistry and Technology 37(6), 478-784
  • Mirski R., Boruszewski P., Trociński A., Dziurka, D. 2017: The possibility to use long fibres from fast growing hemp (Cannabis sativa L.) for the production of boards for the building and furniture industry. BioResources 12(2), 3521-3529
  • Przybysz Buzała K., Kalinowska H., Małachowska E., Przybysz P. 2017: The utility of selected kraft hardwood and softwood pulps for fuel ethanol production. Industrial Crops and Products 108, 824-830
  • Przybysz Buzała K., Kalinowska H., Przybysz P., Małachowska E. 2017: Conversion of various types of lignocellulosic biomass to fermentable sugars using kraft pulping and enzymatic hydrolysis. Wood Science and Technology 51, 873-885
  • Przybysz K., Kalinowska H., Borkowski J., Przybysz P. 2017: Effect of xylanases on refining process and kraft pulp properties. Cellulose 25, 1319-1328

2016

  • Boruszewski P., Borysiuk P., Mamiński M., Czechowska J. 2016: Mat compression measurements during low – density particleboard manufacturing. BioResources 11(3), 6909-6919
  • Borysiuk P., Chrzanowski Ł., Auriga R., Boruszewski P. 2016: Thermally modified particles as raw material for particleboards production. Proceedings of the 10th International Science Conference Chips and Chipless Woodworking Processes (08-10.09.2016, Zvolen, Slovakia), 241-245
  • Dubowik M., Przybysz P., Kucner M., Przybysz K., Małachowska E., 2016: Effect of refiner load on papermaking potential of cellulosic pulp. Journal of International Scientific Publications, Materials, Methods & Technologies 10, 231-238
  • Grzegorzewska E. 2016: Ekonomiczne aspekty funkcjonowania firm rodzinnych w Polsce na tle krajów europejskich. Przedsiębiorczość i Zarządzanie 17(6)/1, 405-416
  • Grzegorzewska E. 2016: Ekonomiczne skutki globalnego kryzysu gospodarczego w opinii przedsiębiorców rodzinnych branży meblarskiej. Przedsiębiorczość i Zarządzanie 17(6)/1, 333-345
  • Grzegorzewska E. 2016: Przewidywanie upadłości przedsiębiorstw rolniczych: studium teoretyczno-empiryczne, Wydawnictwo SGGW w Warszawie, Warszawa 2016, 160 pp.
  • Grzegorzewska E., Więckowska M. 2016: Selected aspects of innovation in the furniture industry – empirical research findings. Drewno 59 (198), 147-161
  • Kong M.T., Lim T.W., Król P., Auriga R., Mamiński M.Ł. 2016: 1,3-Dimethylol-4,5-dihydroxyethyleneurea as a potential alternative binder for plywood. Journal of Adhesion 92(11), 908-915
  • Kowaluk G., Zając M., Czubak E., Auriga R. 2016: Physical and mechanical properties of particleboards manufactured using charcoal as additives. iForest 10(1), 70-74
  • Kucner M., Przybysz P., Dubowik M., Przybysz K., Małachowska E. 2016: The impact of storage conditions of pulp on its susceptibility to refining and properties of fibers. Journal of International Scientific Publications, Materials, Methods & Technologies 10, 224-231
  • Laskowska A. Dobrowolska E., Boruszewski P. 2016: The impact of ultraviolet radiation on the colour and wettability of wood used for facades. Drewno 59(197), 99-111
  • Mamiński M., Kozakiewicz P., Jaskółowski W., Chin K.L., H’ng P.S., Toczyłowska-Mamińska R. 2016: Enhancement of technical value of oil palm (Elaeis guineensis Jacq.) waste trunk through modification with 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU). European Journal of Wood and Wood Products 74, 837-844
  • Olenska S., Smardzewski J., Beer P. 2016: The stiffness of one-sided asymmetrically veneered composites. BioResources 11 (4), 9386-9399
  • Robles E., Czubak E., Kowaluk G., Labidi J. 2016: Lignocellulosic-based multilayer self-bonded composites with modified cellulose nanoparticles. Composites Part B: Engineering 106, 300-307
  • Wysocka K., Szymona K., McDonald A., Mamiński M. 2016: Characterization of thermal and mechanical properties of lignosulfonate- and hydrolyzed lignosulfonate-based polyurethane foams. BioResources 11(3), 7355-7364.

2015

  • Burawska, I., Zbieć, M., Tomusiak, A., Beer, P. 2015: Local reinforcement of timber with composite and lignocellulosic materials. BioResources 10(1), 457-468
  • Chin K.L., H’ng P.S., Paridah M.T., Szymona K., Mamiński M., Lee S.H., Lum W.C., Nurliyana M.Y., Chow M.J., Go W.Z. 2015: Reducing ash related operation problems of fast growing timber species and oil palm biomass for combustion applications using leaching techniques. Energy 90, 622-630
  • Lee S. H., Lum W. C., Zaidon A., Mamiński M. 2015: Microstructural, mechanical and physical properties of post heattreated melamine-fortified urea formaldehyde-bonded particleboard. European Journal of Wood and Wood Products 73, 607-616
  • Oleńska S., Tarcicki P., Cichy A., Mamiński M., Beer P. 2015: Asymmetrical Veneering with Hardwood Species of Various Shrinkage Value. Drvna Industrja 65(2), 139-142
  • Toczyłowska-Mamińska R., Szymona K., Madej H., Wong W.Z., Brutkowski W., Bala A., Krajewski K., H’ng P.S., Mamiński M. 2015: Cellulolytic and electrogenic activity of Enterobacter cloacae in mediatorless microbial fuel cell. Applied Energy 160, 88-93